Does the app place you in the wrong spot, or does your position keep jumping around on the map? In most cases this is caused by the location settings of your iPhone, and you can fix it yourself in a few steps.
1) Give Peek permission to use your precise location
- Go to Settings > Privacy & Security > Location Services
- Make sure Location Services is switched on
- Scroll down and tap Peek
- Select While Using the App (or Always if you also want location updates in the background)
- Switch on Precise Location


Without Precise Location, iOS only shares an approximate location with the app, which is not accurate enough for an excursion.
2) Switch on Wi-Fi and Bluetooth
Your iPhone does not use GPS alone: it also uses Wi-Fi networks and Bluetooth nearby to determine your position more quickly and accurately. You don’t have to connect to anything, just leave both switched on. Do this from Settings and not from the Control Centre, because the Control Centre only disables them temporarily.
3) Calibrate the compass
Open the Compass app and move your iPhone in a figure of eight until the calibration screen disappears. This also improves the direction shown in Peek.
4) Keep the screen on and the app in the foreground
Locking your phone or switching to another app for a longer period may cause iOS to pause location updates. Keep Peek open while walking to the next location.
5) Still jumping around?
- Switch Aeroplane mode on for about 10 seconds and then off again to reset the location sensors
- Restart your iPhone
- Give your phone a minute outdoors with a clear view of the sky: the first accurate GPS fix can take a moment
Good to know: accuracy is always lower under dense tree cover, between tall buildings, in valleys or indoors. Deviations of several metres are normal there and not a fault in the app. Are you still unable to reach a location? Contact us at hello@peek.app or your Trip Designer.